Noise and Vibration Reducing STAUFF NRC Clamps

STAUFF NRC type clamps were designed for the noise and vibration reducing installation of pipes, tubes and hoses with the most common outside diameters between 6 and 42 millimeters (1/4"-1 1/2")for tubes and between 38 and 55,7 millimeters 1 1/2"- 2") for hoses. The working principle is based on clamp bodies made from Polypropylene following the Standard and Heavy Series according to DIN 3015 with a specially shaped, two-part elastomer insert, which mechanically absorbs vibrations in the pipe, tube or hose and as a result reduces noises arising to a minimum. The insert is in particular distinguished by how little of its surface is in contact with the pipe, tube or hose and clamp body, and as a result is far more effective than the previously known solutions.

Filters / Sorting

STAUFF Series

STAUFF Size

Installation of Pipes

Installation of Hoses

Installation of Cables

fixed installation of line

sliding installation of line

Vibration Reducing

Tension Clearance

Inside Surface

for Diameter (mm)

Material (Clamp Body)

Material (RI-Insert)

Categories

12 Results
STAUFF Material Description
STAUFF Material No.
212-PP-NRC
6100056008
STAUFF Material Description
STAUFF Material No.
212-PP-NRC
6100056008
STAUFF Material Description
STAUFF Material No.
212.7-PP-NRC
6100056007
STAUFF Material Description
STAUFF Material No.
212.7-PP-NRC
6100056007
STAUFF Material Description
STAUFF Material No.
420-PP-NRC
6100055988
STAUFF Material Description
STAUFF Material No.
420-PP-NRC
6100055988
STAUFF Material Description
STAUFF Material No.
521.3-PP-NRC
6100055980
STAUFF Material Description
STAUFF Material No.
521.3-PP-NRC
6100055980
STAUFF Material Description
STAUFF Material No.
522-PP-NRC
6100055979
STAUFF Material Description
STAUFF Material No.
522-PP-NRC
6100055979
STAUFF Material Description
STAUFF Material No.
525-PP-NRC
6100055978
STAUFF Material Description
STAUFF Material No.
525-PP-NRC
6100055978
STAUFF Material Description
STAUFF Material No.
530-PP-NRC
6100055958
STAUFF Material Description
STAUFF Material No.
530-PP-NRC
6100055958
STAUFF Material Description
STAUFF Material No.
532-PP-NRC
6100055880
STAUFF Material Description
STAUFF Material No.
532-PP-NRC
6100055880
STAUFF Material Description
STAUFF Material No.
638-PP-NRC
6100055874
STAUFF Material Description
STAUFF Material No.
638-PP-NRC
6100055874
STAUFF Material Description
STAUFF Material No.
642-PP-NRC
6100055870
STAUFF Material Description
STAUFF Material No.
642-PP-NRC
6100055870
STAUFF Material Description
STAUFF Material No.
RI-NRC-33.7-6-SA73
1130033050
STAUFF Material Description
STAUFF Material No.
RI-NRC-33.7-6-SA73
1130033050
STAUFF Material Description
STAUFF Material No.
RI-NRC-42-6-SA73
1130033054
STAUFF Material Description
STAUFF Material No.
RI-NRC-42-6-SA73
1130033054

You have a regular demand for pipework equipment and hydraulic components and you are looking for individual pricing for our product range, please contact STAUFF.

STAUFF Online Page-Flip Catalog

Navigate and search content, forward via email, print and download in PDF format

STAUFF Online Page-Flip Catalog
Navigate and search content, forward via email, print, and download in PDF format

STAUFF Product Catalog

Download entire STAUFF product catalog in PDF format

STAUFF NRC-Clamps

Noise and Vibration Reducing STAUFF NRC Clamps

STAUFF NRC type clamps were designed for the noise and vibration reducing installation of pipes and tubes with the most common outside diameters between 6 and 42 millimeters.

The working principle is based on clamp bodies made from Polypropylene following the Standard Series according to DIN 3015 (part 1) with a specially shaped, two-part elastomer insert, which mechanically absorbs vibrations in the pipe and as a result reduces noises arising to a minimum.

The insert is in particular distinguished by how little of its surface is in contact with the pipe and clamp body, and as a result is far more effective than the previously known solutions.

The insert is in particular distinguished by how little of its surface is in contact with the pipe and clamp body, and as a result is far more effective than the previously known solutions. 

This patented system permits combining the absorbing properties of the clamp, which are so vital for this application, with the pipe retaining forces required. Thanks to the functional design, we have expanded the possibilities of DIN 3015 without deviating from it in the dimensions relevant for the installation. 

The tongue-groove contour of the insert and body, which is reversed and thus diverges from DIN 3015, enables the system to be used for the widest possible range of pipe diameters per clamp size, which contributes to flexibility and versatility. 

STAUFF NRC Clamps are completely compatible with the commonly used steel and stainless steel mounting hardware, and if necessary, can simply be replaced or retrofitted. 
 
STAUFF also provides an alternative version especially for use in safety-critical areas, which is made completely out of flame resistant materials according to international standards and directives, and meets the demanding requirements with regards to preventive fire protection. 

Highly efficient vibration and noise reduction when installing pipes and tubes

 

Particularly in the field of civil shipping, i.e. on cruise ships as well as yachts and sport boats, effective noise damping has become important in recent years as a criterion in the planning of machinery, devices, and systems, and selecting the corresponding components, since it does after all make a great contribution to comfort and facilitates communication on board.  

Furthermore, it is known that noise emissions can have grave effects on a wide range of maritime animals. 

 

Ship-owners and shipping yards around the world are increasingly following this trend and are putting reduced thresholds for noise and vibrations in place. The International Maritime Organization (IMO) has also dealt with the determination of noise thresholds, e.g. for engine and control rooms as well as for crew quarters and for the reduction of underwater noise, in order to protect the environment. 

 

The rising demands of industry on the reduction of noise emissions for mobile and stationary applications in harbor and loading areas as well as other areas of use is equally relevant, also against the background of the cross-industry guidelines of the “Outdoor Directive” 2000/14/EC (“Noise emission in the environment by equipment for use outdoors”) and the Machinery Directive 2006/42/EC.

Main Benefits of Noise and Vibration Reducing NRC Clamps

Mobile and stationary machines in harbor and loading areas as well as municipal and commercial vehicles..

  • Reducing the overall level of noise emissions, 
    especially in urban areas 

  • Improving occupational health and safety 

  • Contributing to build machinery that conforms to the 
    Machinery Directive 2006/42/EC and the Outdoor Directive 
    2000/14/EC of the European Parliament and of the Council 

  • Maximizing flexibility with the design, layout, and positioning 

of noise-intensive pipes and tubes (e.g. in close proximity to 

  • cabins or crew quarters) 

  • Making a great contribution to comfort and facilitating 
    communication on board (e.g. for engine and control rooms) 

  • Reducing of underwater noise in order to protect the 
    maritime environment 

Apart from the regular NRC clamps, STAUFF also provides another version especially for use on the high seas, which is made completely out of flame-resistant materials according to international standards and directives and meets the demanding requirements with regards to preventive fire protection. 
 
In addition, all of the materials used by STAUFF are distinguished by their outstanding durability, e.g. against seawater, mineral oil and other oils and a wide temperature range used.

 

Order STAUFF Articles Online

The STAUFF web shop allows commercial customers and users to purchase and order the products displayed in this category online – quickly, easily, safely, and economically priced.

STAUFF provides direct access to a comprehensive range of products with more than 50,000 individual standard hydraulic components in 10 product groups for mechanical and plant engineering and for industrial service and maintenance. In addition, STAUFF is also able offer individually designed system and special solutions according to customer's requirements.

The majority of original STAUFF products can be delivered at short notice.

EditMenuCloseResetCheckSpinnerFiltersCart